FIRST Water Purification Started in the (1700 AD) WORLD – for Domestic Use (Part-2)
पहली बार विश्व में घरेलु पेयजल शुद्धीकरण का प्रारंभ कब से हुआ ।
In the 1700s the first water filters for domestic application were applied. These were made of wool, sponge and charcoal. In 1804 the first actual municipal water treatment plant designed by Robert Thom, was built in Scotland. The water treatment was based on slow sand filtration, and horse and cart distributed the water. Some three years later, the first water pipes were installed. The suggestion was made that every person should have access to safe drinking water, but it would take somewhat longer before this was actually brought to practice in most countries.
FIRST Water Born disease “Cholera” discovered.
In 1854 it was discovered that a cholera epidemic spread through water. The outbreak seemed less severe in areas where sand filters were installed. British scientist John Snow found that the direct cause of the outbreak was water pump contamination by sewage water. He applied chlorine to purify the water, and this paved the way for water disinfection. Since the water in the pump had tasted and smelled normal, the conclusion was finally drawn that good taste and smell alone do not guarantee safe drinking water. This discovery led to governments starting to install municipal water filters (sand filters and chlorination), and hence the first government regulation of public water.
In the 1890s America started building large sand filters to protect public health. These turned out to be a success. Instead of slow sand filtration, rapid sand filtration was now applied. Filter capacity was improved by cleaning it with powerful jet steam. Subsequently, Dr. Fuller found that rapid sand filtration worked much better when it was preceded by coagulation and sedimentation techniques. Meanwhile, such waterborne illnesses as cholera and typhoid became less and less common as water chlorination won terrain throughout the world.
But the victory obtained by the invention of chlorination did not last long. After some time the negative effects of this element were discovered. Chlorine vaporizes much faster than water, and it was linked to the aggravation and cause of respiratory disease. Water experts started looking for alternative water disinfectants. In 1902 calcium hypo chlorite and ferric chloride were mixed in a drinking water supply in Belgium, resulting in both coagulation and disinfection. In 1906 ozone was first applied as a disinfectant in France. Additionally, people started installing home water filters and shower filters to prevent negative effects of chlorine in water.
In 1903 water softening was invented as a technique for water desalination. Cations were removed from water by exchanging them by sodium or other cat ions, in ion exchangers.
Eventually, starting 1914 drinking water standards were implemented for drinking water supplies in public traffic, based on coliform growth. It would take until the 1940s before drinking water standards applied to municipal drinking water. In 1972, the Clean Water Act was passed in the United States. In 1974 the Safe Drinking Water Act (SDWA) was formulated. The general principle in the developed world now was that every person had the right to safe drinking water.
Starting in 1970, public health concerns shifted from waterborne illnesses caused by disease-causing micro organisms, to anthropogenic water pollution such as pesticide residues and industrial sludge and organic chemicals. Regulation now focused on industrial waste and industrial water contamination, and water treatment plants were adapted. Techniques such as aeration, flocculation, and active carbon adsorption were applied. In the 1980s, membrane development for reverse osmosis was added to the list. Risk assessments were enabled after 1990.
Water treatment experimentation today mainly focuses on disinfection by-products. An example is TRI HALO METHANE (THM) formation from chlorine disinfection. These organics were linked to cancer. Lead also became a concern after it was discovered to corrode from water pipes. The high pH level of disinfected water enabled corrosion. Today, other materials have replaced many lead water pipes.
आपको यह ब्लॉग कैसा लगा ?
कृपया अपना विचार
comments box में अवश्य लिखें।
Name & E-mail लिखना न भूलें।
आपके विचार हमें उत्साहवर्द्धन करेगी।
? Amrita Ananya ?